Posts

Showing posts with the label for

Prosedur perbaikan Software dengan UFSHWK untuk Pemula./Repair procedure with UFSHWK Software for beginners.

Repair procedure Software Prior to making improvements in the Software will be corrected phones must meet full-loaded below: a. Voltage battery minimum voltage 3.7 Volt is on (if your mobile phone siemens, Samsung, LG, and sony ericsson the cause for the tension is not in the type field is provided directly by the UFS). b. Do not happen Short on the input voltage. If there is a short then the mobile phone to be fixed ahead of time as a Hard-ware, i.e.: check the resistance of the battery cell phone interface engine, maximum 6 Ohm resistance, then you revert pol-avometernya, cell phone cable arity must show no movement occurs on the needle of the instructions. c. Flash Interface on the PCB must be clean. If dirty then you clear the first using a brush and give it a slightly thiner and drain. d. After the phone is connected to the UFS tornado, once on click "Check" cell phones should be detected, if in LCD is not found by tesmode or local mode (for Nokia). Techniques of detecti